Synchronization will enable two or more devices (Rayo) to flash the same pattern at the same time. The timing of the flashing is achieved in an autonomous manner, not the flashing pattern. The desired flashing pattern must be configured on each device beforehand.
An example procedure for setting up synchronization of two devices A and B:
1. Set the blinking pattern in Mode 1 of device A to glow, glow, glow and also enable Synchronization in Mode 1.
2. Set the blinking pattern in Mode 3 of device B to glow, glow, glow and also enable Synchronization in Mode 3.
3. Turn on device A and set to Mode 1. Turn on device B and set to Mode 3.
4. The blinking patterns of each device will start to synchronize.